Silicone O-Ring, 80A Durometer, Red,3/64" ID, 9/64
Silicone O-Ring, 80A Durometer, Red,3/64" ID, 9/64" OD, 3/64" Width (Pack of 1000)
Part Number Port Payment Terms
ORAR00002 Shanghai,Ningbo L/C,T/T,Western Union
Actual ID Actual OD Actual Width
0.042 inches 0.142 inches 0.05 inches
Nominal ID Nominal OD Nominal Width
3/64 inches 9/64 inches 3/64 inches
Dash Size Pkg Qty Certificate
002 1000 ISO/TS:16949:2009
canized compression molding
Brand Name Material Type Hardness
Uninovo,Sealsmart Silicone Rubber 80 A
System of Measurement Color Name Cross Section Shape
Inch Red Round
LowerTemperature Range Upper Temperature Range Specification Met
-65 Degrees Fahrenheit 450 Degrees Fahrenheit AS568
1.Made of silicone for use with a variety of chemicals and fluids
2.Can be used across a wide temperature range from -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C)
3.Round in cross-section to provide a seal between cylindrical overlapping surfaces
4.Durometer (hardness) of 70A for resistance to penetration
5.Meets standards defined by Aerospace Standard AS568
1.Shipping Information: View shipping rates and policies
2.Shipping: This item is also available for shipping to select countries outside the U.S.
This silicone O-ring is red in color, round in shape, has a durometer of 80A, and is designed for use in a wide variety of sealing applications.
Silicone is acceptable for temperature applications between -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C). It has good resistance to ozone, weather, detergent, salt water, engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, and high molecular weight chlorinated aromatic hydrocarbons. Silicone is vulnerable to mechanical wear and tear, water and steam over 250 degrees F (121 degrees C), aromatic hydrocarbons (benzene), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels.
O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in a number of sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter.
This silicone O-ring has a shore durometer of 80A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation.
This silicone O-ring meets standards defined by Aerospace Standard AS568, which is the Aerospace Size Standard for O-rings.