Skip Navigation LinksHome >> Selling Leads >> Selling lead details
Buna-N O-Ring, 60A Durometer, Round, Black 1/32" ID, 3/32" OD, 1/32" Width (Pack of 1000)

Buna-N O-Ring, 60A Durometer, Round, Black 1/32" ID, 3/32" OD, 1/32" Width (Pack of 1000)

Selling Lead Details

Selling Lead Details

Quantity:
100000------500000 pieces
Packaging:
Inner Plastic bag; Outer paper carton
Samples:
-
Selling Lead Description

Selling Lead Description

Buna-N O-Ring, 60A Durometer, Round, Black 1/32" ID, 3/32" OD, 1/32" Width (Pack of 1000)
Model:A-001

Product Specifications

Part Number Port Payment Terms
ORAR00001 Shanghai,Ningbo L/C,T/T,Western Union

Actual ID Actual OD Actual Width
0.029 inches 0.109 inches 0.04 inches

Nominal ID Nominal OD Nominal Width
1/32 inches 3/32 inches 1/32 inches

Dash Size Pkg Qty Certificate
001 1000 ISO/TS:16949:2009

Technology
canized compression molding


Specification:

Brand Name Material Type Hardness
Uninovo,Sealsmart Nutrile Rubber 60 A

System of Measurement Color Name Cross Section Shape
Inch Black Round

LowerTemperature Range Upper Temperature Range Specification Met

-30 Degrees Fahrenheit 250 Degrees Fahrenheit AS568


Product Features

1.Made of Buna-nitrile (also called Buna-N) for use with a variety of fluids from petroleum to aliphatic hydrocarbons
2.Durometer (hardness) of 60A for resistance to penetration
3.Round cross-section to provide a seal between cylindrical overlapping surfaces
4.For use across a wide temperature range from -30 degrees F/-34 degrees C to 250 degrees F/121 degrees C
5.Meets standards defined by Aerospace Standard AS568


Product Details

1.Shipping Information: View shipping rates and policies
2.Shipping: This item is also available for shipping to select countries outside the U.S.

Product Description

This O-ring is made of black Buna-nitrile (Buna-N) and has a durometer of 60A. It has a round cross-section and can be used across a wide temperature range (-30 degrees F/-34 degrees C to 250 degrees F/121 degrees C). Designed for use in a wide variety of sealing applications, this Buna-nitrile O-ring meet standards defined by Aerospace Standard AS568, which is the Aerospace Size Standard for O-rings.

Buna-nitrile can have high tensile strength, as well as abrasion, tear, and compression set resistance. It is compatible for use with petroleum, hexafluoroacetone (HFA), hexafluoro-2-butyne (HFB) and hydrofluorocarbon (HFC) fluids, vegetable oil, alcohol, acids, and aliphatic hydrocarbons. Buna-nitrile is vulnerable to acetone, ethers, esters, ozone, sunlight and weathering, and should not be used in ozone-generating electric motors, welding equipment, or in applications with exposure to UV light.

The durometer hardness of this Buna-N O-ring is 60A. Durometers measure the hardness of a material and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation. On a scale of 0 to 100, a value of 0 indicates that a sample was completely penetrated, while a value of 100 shows no indentation in the sample. The letter following the number identifies the shore scale, which is either shore A or D. Shore A is used for softer plastics, while shore D is used for harder plastics.

O-rings provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section, and a hole in the center, similar to a doughnut. O-rings are available in various AS568 dash sizes, which is the standardized sizing for O-rings, and defines the nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter of an O-ring.

SH17781266-140320
Send your message

Send your inquiry to this supplier

Shanghai Uninovo Seal Co.,Ltd.
  • success
  • * Subject:
  • * Message:
    [Characters left:]